JC800
• Powerful wide abrasive belt grinding mechanism;
• Four groups of flexible grinding rollers;
• Vacuum conveying platform, which can process the smallest workpiece of 50x50mm;
• Only for the corners of the workpiece, the edge of the hole, the surface has little effect;
• Machinable surface microformed or surface machined parts;
• Long life of consumables;
• The operation is convenient and intuitive. The equipment has built-in LED light source to observe the internal processing status.
FUNCTION
JC800 This machine is suitable for punching, laser, plasma cutting, cutting, machining and other workpieces to remove burrs, flashes, chamfers, blunts, etc. The powerful wide abrasive belt grinding mechanism is used for the pretreatment of large burrs in the horizontal direction or the wire drawing treatment of the whole board. Four sets of flexible roller brushes rotate in forward and reverse directions to ensure a continuous and uniform grinding effect. The high-efficiency and clean processing characteristics are suitable for workpieces to enter the next process of folding, surface spraying, welding, etc., and solve the problems of low efficiency, flying dust, and inconsistent grinding of workpieces in manual grinding.
CHARACTERS
- Dry operation.
- Wide abrasive belt head for sanding out the burrs or surface finishing.
- Planetary type abrasive barrel station for further edge rounding, 6 abrasive barrels, and planetary rotation.
- Vacuum conveyor table to accommodate small parts, smallest parts available 50x50mm.
- Planetary abrasive barrel station will only focus on the edges and contours of the parts, minimum effect on the whole surface.
- Capable of processing minor formed /profiled parts.
- Long life span of consumables.
- Straight forward and user-friendly operation.
- Auxiliary LED lighting inside machine.
- Dust collection hood is installed inside the machine.
STRUCTURE
Model: JC800
With only 8 planetary abrasive polishing barrels for light burr removal and edge rounding.
Model: JC800-BG
With wide sanding belt for heavy burr removal and planetary abrasive polishing barrels for secondary burr removal and edge rounding.
Model: JC800-GBG
With wide sanding belt for heavy burr removal and 8 planetary abrasive polishing barrels for secondary burr removal and edge rounding. last wide sand belt is for straight line finishing.
PARAMETERS
| Working width | ≤800mm | Brush roller size | φ300mm×300mm |
| Min. working size | 50x50mm | Dust collector | 4000m³/h |
| Working thickness | 0.3~80mm | Total power | 24KW |
| Feed speed | 0.5~5m/min(adjustable) | Working height | 930±30mm |
| Revolution speed | 2~17r/min(adjustable) | Profile dimension | 2400×2050×2200mm |
| Head speed | 1000r/min | Weight | 3.5T |
| Number of planetary shafts | 1 | Abrasive material | Belt + brush roller |
| Brush head | 4 | Belt size | 1910MM✖800MM |
MATERIAL
- Carbon steel, stainless steel, Aluminium, Copper, graphite, etc.
- Parts with protective vinyl film (machine will not damage the film, therefore protect the
surface underneath). - Working thickness range from 0.5mm- 100mm.
- Carbon steel parts that require large radius on the edges
VIDEO
